Allstates Coatings

GLADEWATER,  TX 
United States
http://www.allstatescoatings.com
  • Booth: 1715


Come see the latest technology in waterborne products.

Since 1982, Allstates Coatings Company manufactures the finest eco-friendly, waterborne industry leading single component cold applied joint and crack sealants for asphalt and concrete, NSF pipe and DTM asphaltic coatings, traffic paints, acrylic DTM coatings and sealcoat additives.  Recognized industry name products like Super Flex, Flex Crete, Gator-Aid, Black Elixir, Flex Crac and Acrysphalt.

See why thousands of governments, contractors and industry use our coatings and sealants worldwide.  Check out our pictures and videos via our website (www.allstatescoatings.com).

Brands: Allstates Coatings Co. ALT-654 Super Flex, ALT-671 Flex Crete, ALT-652 Gator-Aid, ALT-659 Black Elixir, ALT-651 Flex Crac, ALT-220 NSF Acrysphalt and Insta-Dri Traffic Paints


 Products

  • Super Flex FUEL RESISTANT Crack Sealant
    Super Flex is the only cold-applied, asphalt-based, one-part fuel resistant sealant that also meets the performance characteristics of ASTM 3405 and D6690. It is ready to use on all pavements including roadways, parking lots, walkways and airports....

  • ALT - 654 Super Flex ®

    FUEL RESISTANT Cold Pour Crack Sealer

    GENERAL:  A highly rubberized asphalt emulsion modified with selected plasticizer to achieve greater flexibility.  Designed for sealing pavement cracks or joints up to 1” in width, in asphalt and concrete surfaces.  Super Flex® is the only cold-applied, asphalt-based, one-part fuel resistant sealant that also meets the performance characteristics of ASTM D3405 and D6690.  It is ready to use on roadways, highways, streets, parking lots, airports, athletic courts, driveways, traffic safety islands, playgrounds and walkways.

    • Fuel Resistant – Meets ASTM D2939
    • Meets ASTM D5893 and DMS-6310 Tensile Stress @150% Elongation
    • Return traffic within 20 minutes under standard conditions
    • Low and high temperature durability
    • Excellent flexibility and resilience characteristics
    • Prevents moisture from entering the subgrade
    • No high temperature tracking problem
  • Gator-Aid Mastic Alligatoring Patch
    Gator-Aid® is a blend of an asphaltic emulsion, mineral fillers, fibers, ground rubber and plasticizers designed especially for alligatored and raveled areas....

  • ALT - 652 Gator-Aid®

    Mastic Alligatoring Patch

    GENERAL:  Gator-Aid® is a blend of an asphaltic emulsion, mineral fillers, fibers, ground rubber and plasticizers designed especially for alligatored and raveled areas.  It is also used for filling cracks in excess of 1” in width on any asphaltic surface.  Economically, Gator-Aid® has superior advantages over hot mix skin patch asphalt that requires digging out the alligatoring areas and replacing them.  It is ready to use on asphaltic surfaces such as athletic courts, driveways, roadways, highways, streets, parking lots, playgrounds, walkways, and running tracks.

    SURFACE PREPARATION:    Surface must be dry and free from all loose material, dirt and dust.

    APPLICATION:     Mix well before using.  Use as is.  Pour on alligatored areas and work in with flat blade squeegee. Gator-Aid® should be applied no thicker than ¼”.  Additional applications may be required in severe circumstances.

    For Filling Cracks:  Fill cracks.  Before it sets up, scrape excess from surface (use V-shape rubber squeegee).

    For Filling Bird Baths:  Should be filled with lifts of ¼” in depth maximum and allowed to harden before any type of seal coating application.

    Gator-Aid® will set under good conditions in several hours, depending on weather and filler thickness.

    COVERAGE:  Up to 20 ft.2 for patching alligatoring areas and bird baths in ¼” depth.  Up to 80 linear feet of ½” X ½” depth cracks.

  • Flex Crete Gray CONCRETE Joint and Crack Sealant
    Flex Crete™ is a gray single-component, ready-to-use, ultra-low modulus, pourable, neutral cure elastomeric emulsion which offers the performance and durability characteristics of conventional silicone BUT is NOT A SILICONE OR POLYURETHANE BASED PRODUCT....

  • ALT-671 Flex Crete™

    Gray Concrete Joint and Crack Sealant

            ADVANTAGESFlex Cretehas several advantages over traditional silicone or two component sealants.
    • Significantly less expensive
    • Used for both joints/seams and cracksealing (NO saw cutting or backer rod installation necessary on cracks)
    • Meets “Rapid Cure” skin-over and complete cure time specification
    • Lower cost barrier to entry with ability to use double-diaphragm drum pump or reusable “industrial-size” syringe and bulk calk gun applicators (no expensive “RAM” pumps or calking cartridges required)
    • Better adhesive properties
    • Greater resistance to noncompressibles including in subfreezing temperatures especially for ultra-low modulus
    • Better resistance to puncture, abrasion or vandalism
    • Greater Shape Factor of up to 1.5 on reservoirs up to 2” (50.8 mm) wide and significantly higher on reservoirs less than 1” (25.4 mm) wide.
    • Greater ability to withstand high heat environments without breaking down
    • Tolerates limited dampness of surface or reservoir (cure times will be increased)
    • Pourable and pumpable
    • Better adhesion to asphalt; no need to remove asphalt from concrete face before sealing
    • Is self-adhesive (unlike silicone) allowing additional product to be applied to correct mistakes
    • Cleaning can be completed with just water in uncured state – NO SOLVENTS needed before curing
    • NO vapors, respiratory or extreme skin irritants
    • No priming or tooling required

     

  • Acrysphalt NSF Certified Coating
    A non-flammable asphalt emulsion blended with an extremely high concentration of unique polymer and plasticizers to achieve extreme adherence to the substrate, durability and flexibility....

  • ALT-220 Acrysphalt

    USER friendly, complies with all V.O.C. emissions and E.P.A. standards.

    GENERAL:  A non-flammable asphalt emulsion blended with an extremely high concentration of unique polymer and plasticizers to achieve extreme adherence to the substrate, durability and flexibility.  Acrysphalt is a black one component, sprayable or dipped coating specially designed to protect from corrosion, water and environmental elements for prime or top coat on any zinc, surface-metal, concrete, wood or brick.  Acrysphalt is the only waterbased coating found to cure quickly and adhere completely to zinc coated metal without pulloff.

  • Insta-Dri® Acrylic Waterborne Traffic Paints
    Allstates Coatings Insta-Dri® Acrylic Traffic Paints are very fast drying paints for use in marking parking lots, airports, and roads. Insta-Dri® may be applied ambient airless or conventional, or may be heated for even faster dry....

  • Insta-Dri® Acrylic Waterborne Traffic Paint

    TT-P-1952F, Types I, ll and III

    Available Colors:  White, Yellow, Blue, Red, Black, Green

    GENERAL:   Allstates Coatings Insta-Dri® Acrylic Traffic Paints are very fast drying paints for use in marking parking lots, airports, and roads. Insta-Dri® may be applied ambient airless or conventional, or may be heated for even faster dry. Insta-Dri® conforms to current VOC regulations and to the requirements of Federal Specification TT-P-1952F, Type I, II, or III and dry to no pickup in less than ten minutes when properly applied at ambient conditions, or one to two minutes when heated to 140ºF (60°C) to 150ºF (66ºC).