Radix Technology Solutions  

Maidstone,  ON 
Canada
http://www.aistechgroup.com
  • Booth: 4141


New product to market: Gear Tooth Alignment Analytics

Radix Technology Solutions, a division of AIS Technologies Group, designs & delivers best in class advanced based technology solutions for manufacturers. Our solutions combining machine vision, advanced robotics and controls, custom automation and software to provide control of quality, efficiency & traceability to manufacturers in North America.

At the show, we will be showcasing one of our proprietary products:  Gear Tooth Alignment Analytics (GTAA). 

GTAA is an automated inspection system for spiral bevel or hypoid gears.  It is designed to automate the process of inspecting differential gear & pinion alignment, resulting in the best possible gear mesh pattern for spiral bevel or hypoid gears. 

With adjustable tolerances and precise tuning, GTAA facilitates minimal rouging application on the gear surfaces(both drive & coast).  Vision results are analyzed through a statistical process control tool, effectively guiding recommendations about alignment.

GTAA's "focus" is on the imprint position of the pinion to the ring, providing precise, valuable results.  It removes guesswork from the engagement of gear teeth, reducing gear noise & warranty claims.

Brands: AIS Technologies Group, Radix Technology Solutions, Tool Tracker, Gear Tooth Alignment Analytics, Link2Logic, Inspect Tracker


 Show Specials

  • All visitors to the Radix Technology Solutions booth will receive both a free inspection evaluation and a 5% discount on the future purchase of Gear Tooth Alignment Analytics, our automated inspection tool for spiral bevel/hypoid gears.  Talk to our booth staff for how to schedule the free evaluation and how to sign up for the 5% discount!

 Press Releases

  • Radix Technology Solutions, a division of the AIS Technologies Group, is pleased to announce the release of a new application specific vision product called Gear Tooth Alignment Analytics (GTAA).  GTAA is designed to automate the process of precisely aligning differential pinion & gears.

     

    This configurable vision application inspects individual gear teeth (drive & coast surfaces), precisely calculating gear mesh contact patterns.  With real-time feedback to the operator, this stand-alone application ensures the achievement of rapid & accurate pinion & gear alignment.  Additional data provided by Gear Tooth Alignment Analytics includes length & width of pattern, position along the flank, total contact area, along with other metrics of value to gear analysis.  An additional benefit to this product is that it requires only minimal rouging on each gear – a process and material savings of substantial value.

     

    “Radix is well known for our ability to solve tricky manufacturing problems with clever technologies,“ says Shawn Horton, Director, Product Management, .  “This is one more example of our commitment to innovation in intelligent manufacturing and Industry 4.0.”

     

    Headquartered in Windsor, Ontario, Radix Technology Solutions & AIS Technologies Group design and deliver award winning intelligent manufacturing technology solutions for major North American automotive manufacturers, as well as pharmaceutical, food/beverage, and aerospace manufacturers. Radix offers vision systems, robotics, automation and software with locations in Windsor and Mississauga, Ontario,  and Trenton, Michigan. 

     

    -end-

     

    For more information, contact:

    Shelley Fellows, Vice-President, Communications

     

    Voice (519) 737-1012 ext. 717

    Or e-mail at shelley.fellows@AIStechgroup.com


 Products

  • Gear Tooth Alignment Analytics (GTAA)
    GTAA is an automated inspection system for spiral bevel or hypoid gears. It is designed to automate the process of inspecting differential gear & pinion alignment, resulting in the best possible gear mesh pattern....

  • GTAA is a vision based, automated inspection system designed specifically for spiral bevel or hypoid gears.  As part of the process of inspecting differential gear & pinion alignment, a GTAA base system includes cameras, optics, lighting, a part holding fixture & inspection automation as well as the specialized software for this innovative inspection system.

    With adjustable tolerances and precise tuning, GTAA facilitates minimal rouging application on the gear surfaces(both drive & coast).  Vision results are analyzed through a statistical process control tool, effectively guiding recommendations about alignment.

    GTAA's "focus" is on the imprint position of the pinion to the ring, providing precise, valuable results.  It removes guesswork from the engagement of gear teeth, reducing gear noise & warranty claims.

For Technical Support with this webpage, please contact support.