Pattern Paving Products

Rock Hill,  SC 
United States
  • Booth: 1323

Safety, Durability & Design

Pattern Paving Products is celebrating over 15 years manufacturing, training and supplying decorative paving products into the asphalt industry. We design and manufacture our products in our South Carolina plant using raw materials proudly produced in the USA.

Brands: Green-Bike-Lanes, ThermoPrintHT, Stamped-Asphalt, FrictionPave


  • Stamped Asphalt
    We manufacture durable slip resistant coatings along with cable stamping templates for the stamped asphalt industry. We have a list of certified applicators that have been through our training program
    and can provide quality installations....

  • The "Stamped Asphalt Surfacing System" consists of stamping a template into freshly placed or re-heated asphalt followed by the application of a polymer modified coating. 

    Stamped Asphalt Coatings have been developed with input from installers... polymer chemists and the manufacturer to provide a durable, slip-resistant attractive user friendly coating. 

    The system is applied by installers trained in stamping and coating asphalt surfaces. 

    The owner or designer of the project can choose from several patterns and a combination of colors to create the desired look. 
    Stamped asphalt coatings are applied at a minimum of 30 dry mils and as thick as 75 dry mils... depending on the application.

  • FrictionPave
    Developed by Pattern Paving Products in 2004 FrictionPave utilizes a two-part epoxy resin and colored 3M granule to create a durable decorative non-slip surface. Patterns can be created by using a paper or plastic stencil along with a cable stamp....

  • The "FrictionPaveTM Surfacing System" consists of a specially formulated two-part binder which is topped with a pigmented or natural stone. Skid resistant and durable surfaces are provided using the FrictionPave Surfacing System on both Asphalt and Concrete. 

    Typical applications for FrictionPaveTM

    • Bicycle lanes
    • Exit and entrance ramps
    • Safety Zones... Schools and Hospitals
    • Sharp corners and dangerous curves
    • Driveways and walkways
    • Pedestrian Cross Walks
  • ThermoPrint HT
    Manufactured by Swarco Industries under contract for Pattern Paving Products, ThermoPrintHT is an aggregate filled thermoplastic heat applied to an asphalt surface and stamped with a cable template to create a brick like pattern....

  • ThermoPrintHT is a specially formulated decorative thermoplastic material that uses anti-skid aggregates to create this durable, raod-marking material. ThermoPrintHT is typically installed to improve pedestrian safety at high traffic intersections, while providing decorative enchacement to the cityscape. Preformed sheets are heat-applied to an asphalt surface and then stamped using ca cable template pattern. The results? A surface that is durable, safe and decorative. 

    Typical applications for ThermoPrintHT 

    • Cross-walks
    • Walk-ways
    • Exit and entrance ramps
    • Safety Zones... Schools and Hospitals
    • ThermoPrintHT can be applied into all new and some existing asphalt surfaces.
  • ThermoPrint
    ThermoPrint is an inlaid thermoplastic decorative pavement marking. A plastic template is used to stamp a pattern into heated asphalt creating an impression that is later filled with pre-cut thermoplastic to match the impression design...

  • The "ThermoPrint High Traffic Surfacing System" consists of imprinting a pattern into a heated asphalt surface, lifting the pattern stencil and filling the imprint with thermoplastic specially tooled to fill the imprint. The thermoplastic is then heated providing a bond to the asphalt. The surface is left to cool and is ready for traffic. 

    Typical applications for ThermoPrint 

    • Cross-walks
    • Walk-ways
    • Exit and entrance ramps
    • Safety Zones... Schools and Hospitals
    • ThermoPrint can be applied into all new and some existing asphalt surfaces.
  • Street Coat
    STREETCOAT “Epoxy Modified Traffic Coating” is a high quality water-borne
    acrylic finish incorporating an epoxy additive to increase the abrasion
    resistance properties of the film....

  • Advantages

    • Twin package, water-based system for ease of application and clean-up.

    • Bonds tenaciously to concrete, masonry and asphalt surfaces.

    • Resists ultraviolet degradation for long-term protection and color stability.

    • Provides durable, non-skid texture on interior or exterior surfaces.

    • Resists wear and abrasion through the incorporation of an epoxy additive.

    • Protects against asphalt degradation by sealing in the vital oils of the asphalt mix.

    • Helps prevent dusting and spalling of concrete surfaces.

    • Surfaces resist penetration from general soils, motor oils and gasoline for ease in cleaning.

    • No toxic fumes or objectionable odor. Meets all VOC requirements. 

  • Street Stain
    StreetStain is a 100% acrylic
    waterborne system applied to a
    prepared concrete, asphalt or
    brick paver surface to create or
    rejuvenate the surface color.


    - unlimited color options

    - high-bred UV stable pigments

    - non-hazardous to environment

    - easy to install, dries fast

    - contains slip resistant additives

    - resists deicing salts · handles northern climates

    - does not track onto shoes

    - advanced cross-linking acrylic technology

    - apply to both new and old concrete as well as brick pavers and asphalt